Program 56 - Lcr Station Group Assignments - Toshiba DK14 Programming Manual

Program 56 – LCR Station Group Assignments
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
SELECT = Station Logical Port Number(s)
Enter port numbers of stations being assigned.
To add a port range, enter XXX✱XXX (low port ✱ high port).
Processor Port Range
DK14 000~009
DK40i 000~027
RCTUA 000~031
RCTUBA/BB 000~079
RCTUC/D 000~239
RCTUE/F 000~335
Program 16
Port Number Line Group
Number
900~916 00~16
Port LCR Station Group
Number No. (1~8)
Strata DK Programming 5/00
DK14, DK40i, all RCTUs and BCUs
Least Cost Routing
Assigns all stations to Group 1
LCR Station Groups
1~4
1~4
1~4
1~4
1~8
1~8
For R4.3 and higher: If a Tie line is assigned in Program 16 for Toll
Restriction and LCR on tandem calls, assign a class of service in this
program. Program ports 900~916 to match the Tie line group numbers 01~16,
Port LCR Station Group
Number No. (1~8)
Program 56 – LCR Station Group Assignments
Enter LCR Station Group (1~8)
Processor Port Range
B1CU 000~055
B2CAU/BU 000~111
B3CAU/BU 000~191
B5CAU/BU 000~335
Port LCR Station Group
Number No. (1~8)
Least Cost Routing
LCR Station Groups
1~4
1~8
1~8
1~8
Port LCR Station Group
Number No. (1~8)
5-23