Toshiba DK14 Programming Manual page 185

Program 59 Overview
Attendant Consoles have 24 flexible buttons (12 on left and 12 on the right side of the dial pad).
This program is used to assign each button to an available function or options. Program 59 record
sheets define the button options (and codes) available.
Table 3-4 Required PC Attendant Console Button Codes
Button Function
Conference Conf
Hold Recall Hold-RC
Incoming Dial "0" In-Dial "0"
Incoming Directory Number In-DN
Incoming Ring Transfer In-Trans
Join-Loop Join-Loop
Out Dial Out Dial
Redial Last Number ( ) Redial or RDL
Release to Idle Release Call or RLS
Speed Dial Select (✱) Speed Dial or SDS
Split Call Split
Supervised Loop Sup Loop
Transfer Recall Trans-RC
Attendant Call Attd Call
Table 3-5 Recommended PC Attendant Console Button Codes
Button Function
Display BLF BLF
Incoming Emergency In-Emrg
Message Waiting/Flash Msg Wait, Flash or MW/FL
Overflow Overflow
Park Recall Park-RC
Table 3-6 Incoming Line Group Button Assignments
In-LG1~241
In-LG2~242
In-LG3~243
In-LG4~244
Strata DK Programming 5/00
Button Labels
Button Labels
In-LG5~245 In-LG9~249
In-LG6~246 In-LG10~250
In-LG7~247 In-LG11~251
In-LG8~248 In-LG12~252
Program 59 – Attendant Console Flexible Button Codes
Code Notes
297 Starts conference calls.
259 Held calls recall on this button.
262 Dial "0" calls ring in on this button.
Incoming calls to the console DN ring on
this button. The console [DN] is the Prog
257
04 assignment of the Prog 04 console
port number.
258 Receive call transfer.
293 Connects any held call to an existing call.
Switches ATTD consoles dial pad from
294
digital to tone mode.
496 Redials the last number.
Releases current call and makes station
476
idle.
497 Begins speed dial selection.
Allows attendant to talk to either party
295
separately on a conference call.
Places call on attendant hold loop key so
296
attendant can supervise call.
No answer transferred calls, recall on this
260
button.
Can originate calls on this button. The
000 Attendant Call LED is lit red any time the
attendant talk path is connected.
Code Notes
298 Displays BLF on CRT or EL display.
Indicates to all consoles an incoming
261
emergency call.
Indicates a message from station or VM
device to Attendant. Disconnects and
499 recalls dial tone on CO line; accesses
Centrex or PBX features; enters pause or
flash during speed dial programming.
299 Places console in the call overflow mode.
263 Parked calls recall on this button.
In-LG13~253
In-LG14~254
In-LG15~255
In-LG16~256
System & Station
3-141