Program 58 - Dk424 Attendant Console Series (Part 1) - Toshiba DK14 Programming Manual

Program 58 – DK424 Attendant Console Series (Part 1)
Processor Type:
Program Type:
Initialized Default:
–
Program 58-1 Attendant Console Overflow Timer
Initialized Default:
✱ ✱ ✱ ✱
Program 58-1 Overview
Incoming Line Calls (not recalls) to attendant consoles will overflow to a designated attendant
console or station port (Program 58-5) if the call is not answered within the time (011~999
seconds) specified by this program. The overflow call will ring on either the
(assigned in Program 59) of the console that receives the overflow call, or the [DN] or CO
button of a station.
Notes
This program sets overflow timer for all attendant consoles (1~4)
G
The overflow destination is assigned in Program 58-5.
G
–
Program 58-2 Attendant Console Display Type
Initialized Default:
✱ ✱ ✱ ✱
SELECT = 2
Console Number (1~4)
Button 01 LED
Attendant
On
Console
(EL) (EGA)
1
2
3
4
Strata DK Programming 5/00
RCTUBA/BB, RCTUC/D and RCTUE/F, B1CU, B2CAU/BU, B3CAU/BU, B5CAU/BU
Station
See each program
32 seconds
SELECT = 1
All LEDs Off
Button 02 LED
Off On Off (58-
(Call Waiting
(FIFO) 4)
Program 58 – DK424 Attendant Console Series (Part 1)
DATA = 011~999 seconds
DATA =
LED Button 01 On for EL or Off for EGA display
LED Button 02 On sets Answer Button operation for First In/
First Out (FIFO) or priority per Program 58-4
LED Button 03 On sets Attendant Console Call Waiting Tone
LED Button 04 On selects the PC Attendant Console; Off
selects the traditional Attendant Console
Button 03 LED
On Off
(No Call
(PC Attendant)
Tone) Waiting Tone)
System & Station
button
Button 04 LED
Off
On
(Traditional
Console)
3-137