Program 46-2~4 - Toll Restriction Allowed/Denied Area Codes By Class - Toshiba DK14 Programming Manual

Program 46-2~4 – Toll Restriction Allowed/Denied Area
Codes by Class
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
SELECT = Toll Restriction Class
(see Legend below)
Enter: 2, 3, 4#
2 = add to memory
3 = Delete from memory
4# = Display allowed codes in
memory (press
Processor Toll Restriction Class
DK14
DK40i
RCTUA
Class:
Class:
Tables with deny box checked do not represent memory. All area codes in memory are allowed.
o
International calls may be allowed/denied by entering 011 as the area code. See Program 47 for International Call Restriction by
o
Country Codes.
Program 46-2~4 Overview
Each class area code provides for a different combination of restrictions.
The tables in this program define the area codes allowed or denied for each Toll Restriction class.
The tables (in memory) operate as allow tables. If an area code exists in a table (displays with 4#),
then it is allowed. Anything not displaying is not allowed. Initialized data allows all area codes for
each class (all codes are in all tables). All allowed area codes can be displayed (4#) for each class.
For each class, choose whether the record table is used to record allowed area codes in memory
(allowed) or denied area codes not in memory (denied). Enter the area codes that define the set.
Strata DK Programming 5/00
Program 46-2~4 – Toll Restriction Allowed/Denied Area Codes by Class
DK14, DK40i, all RCTUs and BCUs
Toll Restriction
Includes all area codes in all classes
to scroll)
#
1~4 RCTUBA/BB, B1CU
1~4 RCTUC/D, B2CAU/BU, B3CAU/BU
1~4 RCTUE/F, B5CAU/BU
DATA = Area Codes
DATA = Area Codes
DATA = Area Codes
Enter or display area codes.
To add a range, enter XXX✱XXX (low area code ✱
high area code).
Several ranges or individual area codes may be
entered by separating them with the # button.
Processor Toll Restriction Class
1~4
1~8
1~8
(Check one) Allowed
(Check one) Allowed
Toll Restriction
❐ ❐
Denied
❐ ❐
Denied
4-31