Program 45-3~6 - Special Common Carrier Numbers And Authorization Code Digit Length - Toshiba DK14 Programming Manual

Toll Restriction
Program 45-3~6 – Special Common Carrier Numbers and Authorization Code Digit Length
Program 45-3~6 – Special Common Carrier Numbers
and Authorization Code Digit Length
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
Item
3
4
5
6
Program 45-3~6 Overview
This program notifies the system of how many digits to ignore before it applies Toll Restriction. It
allows the system to use Special Common Carrier (SPCC) authorization codes to modify
restrictions when the station user is dialing a long distance carrier. The user enters a telephone
number to access the carriers. Original restrictions re-activate after the carrier number is dialed.
The sequence is: the first five digits of the SPCC Number (950XXXX) + Telephone Number +
Credit Card Authorization Code.
SMDR prints out the following: SPCC Number + ---- + Telephone Number (the Authorization
Code does not print out. If the SPCC access code is a 1+800 number, the dialed SPCC code will
overwrite the actual telephone number dialed on the SMDR report.
Do not set 10XXX or 101XXXX Carrier Access Codes (CACs) in this program. The DK Strata
system automatically treats CACs as special codes and applies Toll Restriction and LCR as
follows:
o For stations that are Toll Restricted, 10XXX+1/101XXXX+1 are restricted for manual dialing
but are allowed in system speed dial and LCR modified digit tables.
o 10XXX+0/101XXXX+0 are allowed or denied depending on the station's class and 46 (10-80)
Key 01 assignment.
o LCR always routes 10XXX and 101XXXX via the local route plan, if not restricted.
4-20
DK14, DK40i, all RCTUs and BCUs
Toll Restriction
Assigns blank data to Items 3 and 5 and "00" data to Items 4 and 6.
SELECT = Item 3~6
Enter the Item number
3~6 from the table below.
Description
SPCC1 Telephone Number
Allowed Digit Length (00~99)
SPCC2 Telephone Number
Allowed Digit Length (00~99)
DATA =
First five digits of the SPCC number, or digit length
specified in the table below.
When editing:
• Press to move cursor.
#
• Press LED Button 01 to delete or leave a blank.
• Press LED Button 02 to allow all digits to work.
DATA = 1st five digits
(SPCC Number or Digit Length)
Strata DK Programming 5/00