Toshiba DK14 Programming Manual page 355

Table 7-2 ISDN PRI DID Type Call Programming (continued)
Program
Program Data
Number
01 LEDs 01-02, 11-12
On
01 LED 13 On
66-3
*
LED 14 On
LED 15 On
66-5 1 01 XXXX
*
66-6 1 01 LEDs 01~23 On
*
67-1 01 3
*
67-2 01 LED's 01-04 On
*
68-1 01 LED's 01-03 On
*
68-2 01 XXX-XXX-XXXX
*
69-1 000-344 1 00
*
09 000-344 (100~444)
*
Strata DK Programming 5/00
This tells the system that Operator calls, Carrier Access, 1+10 Digit Dialing,
and Ring Back Tone to the outside caller are allowed.
This tells the system when interfaced with DMS XXX to send the Progress
Descriptor 81 or 83.
When connecting to a DMS XXX with NI1 protocol.
Set up message for outgoing call. When connecting to a DMS XXX. LED 11
must be Off in Program *66-3 when this LED is On.
This assigns the LDN/DID/DNIS number, the
wildcard.
This assigns the CO lines to the index.
This tells the system that the PRI Span is for both-way calling.
This tells the system to accept Speech, 3.1K Analog, 56K, and 64K type
calls on the ISDN PRI Span.
This tells the system to accept and send Calling Party Number on ISDN PRI
Calls.
XXX-XXX-XXXX is the number you want the system to send out on an
outbound call for Caller Number Identification.
This tells the system to send the number entered in Program
Calling Party Number Identification for all stations on outbound calls.
Enter the DID number for the station port that is to receive a call to the dialed
DID number.
Guidelines for Programming ISDN Calling Features
Description
(asterisk) can be used as a
*
ISDN
68-2, as the
*
7-7