Toshiba DK14 Programming Manual page 116

System & Station
Program 29-1~8 – DSS Console and Number Button Assignments
Program 29-1~8 Overview
Each button on the DSS consoles can be flexibly assigned as either a Direct Station Selection
( ), Line (
( ) buttons may be changed to one of these three types, but not vice versa.
Station Speed Dial buttons assigned to a DSS console share the associated attendant digital or
electronic telephone's Speed Dial memory. The personal Speed Dial numbers of the DSS console
circuit port(s) are not available. Initialized data assigns the 60 buttons to be Direct Station
Selection (
independently programmed.
Important!
Note
3-72
), or button. The standard equipped
), (
Only program the following buttons:
(
system operation problems.
It is not possible to assign [PDNs]/[SDNs]/[PhDNs] to DSS consoles or ADMs
When assigning CO line access buttons (001~200), the associated telephone must be
assigned access to the CO line also. See Program 40 on
), and (
,
); programming other feature buttons on a console may cause
( ), and
). Each of the consoles can be
( ), ,
Page 4-4.
Strata DK Programming
( ), and
5/00