Toshiba DK14 Programming Manual page 35

Program 91-1 Example
Action (press buttons + LED Buttons)
1. Use the LCD programming phone per Minimum Hardware
Requirements on Page
✱ ✱ ✱ ✱
2.
Enter programming mode. (Do not press [DN] button.)
3.
Access Program 91. System beeps after
to indicate program number may be entered.
4.
Prepare the system for a station port selection.
5. Press
6. Press LED Buttons 01 and 02 (LEDs turn On)
7. Press
The telephone will exit the programming mode and button LEDs 01
and 02 will go out after a short delay.
1. N-N is the Program Telephone [DN].
Strata DK Programming 5/00
1-14.
Program 91-1 – Automatic PCB Recognition and Port Renumber
Jan 20 Sun
Program Mode
Program = 91
is pressed
91 Select =
91 Select = 1
Renumber and Reset
91 Select = 1
Renumber and Reset
(Month Day Time)
Initialization & Test
LCD Response
1
No. N-N
06:43
Data Store
No. N-N
2-7