Toshiba DK14 Programming Manual page 183

Notes
EMRG has first priority over the above key assignments.
G
See Program 59 for the function of each button.
G
–
Program 58-5 Attendant Console Overflow Destination Assignments
Initialized Default:
✱ ✱ ✱ ✱
SELECT = 5
Console Number (1~4)
Processor Type
DK14
DK40i
RCTUA
RCTUBA/BB
RCTUC/D
RCTUE/F
Program 58-5 Overview
When the attendant console has been placed in the Overflow mode (via the
queue to be answered based on the predetermined FIFO or priority basis. If a call remains in queue
for a period longer than the time period set for the Overflow Timer (set in Program 58-1), then the
call will overflow to the destination assigned in this program.
The assigned destination can be either a station, voice mail, auto attendant, or another attendant
console.
Calls that will overflow include ring transfer, incoming CO
G
button calls; Transfer Recall (
Overflow recall time is set in Program 58-1.
G
Strata DK Programming 5/00
Blank
Port Range
000~009
000~027
000~031
000~079
000~239
000~335
) and
Program 58 – DK424 Attendant Console Series (Part 1)
Enter the overflow destination port number.
Console overflow destination =
Processor Type Port Range
B1CU 000~055
B2CAU/BU 000~111
B3CAU/BU 000~191
B5CAU/BU 000~335
, " ", and
recall will not overflow.
System & Station
button), calls
3-139