Program *36 - System Nt Button Lock Password Changing Station Assignment - Toshiba DK14 Programming Manual

System & Station
Program *36 – System NT Button Lock Password Changing Station Assignment
Program *36 – System NT Button Lock Password
Changing Station Assignment
Processor Type:
Program Type:
Initialized Default:
✱ ✱ ✱ ✱
Program *36 Overview
Attendant Consoles and stations assigned in this program can change the System Night Transfer
(NT) Lock password by dialing the sequence below:
Only one station or console can change the code. System/Tenant CO lines can be locked into the
Day, Day2, or Night ringing mode only after the NT Lock password is entered. Locking the system
into a particular ringing mode adds security to line call routing which prevents accidental or
mischievous changing of the system ringing mode.
Any telephone or an attendant console can lock the system into a ringing mode. The telephone or
console must have both a
locking the system must enter the password.
NT lock related programs include:
Program 39
Program 59
Program *36
Program *15
Program 74
Program 77-3
3-106
DK14, DK40i, all RCTUs and BCUs
Station
000
✱
Tenant Number 1~4
Processor Type Port Range
DK14 000~009
DK40i 000~027
RCTUA 000~031
RCTUBA/BB 000~079
RCTUC/D 000~239
RCTUE/F 000~335
Tenant Number
1
2
3
4
Tenant Number 1~4
Station Flexible Button Assignments –
Attendant Console Flexible Button Codes –
NT Lock Station Assignment. Program *36 is not required to assign attendant consoles to NT Lock
functions
CO Line Tenant Assignments
System NT Lock Password Assignment
Tenant Night Ring Over External Page Assignments
DATA = Station port designated as Night Transfer Lock
Password Change Station for selected tenant.
Processor Type
B1CU
B2CAU/BU
B3CAU/BU
B5CAU/BU
NT Lock Station or Console Port
Night Transfer Lock Password
and an
and
Port Range
000~055
000~111
000~191
000~335
button and the person
buttons
and buttons
Strata DK Programming 5/00