Program 36 - Fixed Call Forward - Toshiba Strata DK14 Programming Manual

Program 36 – Fixed Call Forward
Processor Type:
Program Type:
Initialized Default:
ÃÆ ÃÆ Ã! Ã"  Tƒx… " % C‚yq
SELECT = Station Logical Port Number
Enter the port number of the station that
needs a Fixed Call Forward location
assigned.
To add a port range, enter XXX
(low port high port).
[PDN] Port
Processor
Range
DK14 000~009
DK40i 000~027
RCTUA 000~031
Port Forward to Tel Port
Program 36 Overview
Fixed Call Forwarding is different from other station Call Forwarding options. It is fixed in terms
of the destination [PDN] which is assigned in this program. The station user cannot change the
Fixed Call Forward destination, unlike the other station Call Forwarding options. If Fixed Call
Forwarding is set on a station, the station does not ring and all calls forward immediately.
Note Telephones and attendant consoles must have a
this feature (See Programs 39 and 59).
Strata DK Programming 5/99
DK14, DK40i, All RCTUs
Station
Does not assign a Fixed Call Forward location to any port
 Tƒx… Æ
XXX
[PhDN] Port DH Group
Range Ports
500~509 900~915
500~527 900~915
500~531 900~915
Port Forward to Tel Port
C‚yq  Tƒx… Æ Æ C‚yq
FORWARD TO TEL = Port Number
Enter the port number of the [PDN], [PhDN] or
DH [DN] that will be call forwarded to when the
button is pressed.
Av‘rqÃ8hyyÃA‚…h…q
[PhDNs] or DH [DNs] can be entered with DK
Release 3.2 and above software only.
[PDN] Port [PhDN] Port
Processor
Range Range
RCTUBA/BB 000~079 500~579
RCTUC/D 000~239 500~739
RCTUE/F 000~335 500~835
Port Forward to Tel Port
)L[HG&DOO )RUZDUG
System & Station
Program 36 – Fixed Call Forward
 Tƒx… Æ Æ C‚yq
DH Group
Ports
900~915
900~915
900~915
Port Forward to Tel Port
button to activate
3-101