Alarm Reset; Alert Signaling; Attendant Console Calling - Toshiba Strata DK User Manual

Alarm Reset

Your Strata DK system can be connected to a facility alarm system. All telephones
produce a startling tone whenever this alarm is activated.
To reset the alarm
$/50
Press

Alert Signaling

Alert Signaling enables you to send an alert sound to a designated station or partner by
pressing a single button. This feature is based on the "buzz" key, where, for example,
a manager might alert an administrative assistant to enter the office.
You can have as many as four Alert Signals to send or receive to/from other
telephones. An Alert Signal is sent even if the alerted telephone is busy (on/off-hook)
or in the DND or Call Forward mode.
To send an Alert Signal
$/(57
Press

Attendant Console Calling

Up to four Attendant Consoles can be installed per system. There can be up to three
ways to call the Attendant Console depending upon system programming.
1. Press a [DN] +

2. Dial .
Strata DK Electronic Telephone 5/99
.
and an alert tone sounds at the designated station.

. The call rings the Attendant Console
The calls rotate between the consoles, if more than
one console is installed.
The Grand Tour
Alarm Reset

button.
19