Appendix B Server Accessories; Graphics Cards; Supported Graphics Cards For Servers With No Ilo Mp Card - HP Integrity rx2600 Operation And Maintenance Manual

This appendix provides information about the graphics cards and mass storage devices supported
on the HP Integrity rx2600 server and HP workstation zx6000.
This appendix addresses the following topics:
■
"Graphics Cards" (page 149)
■
"Mass Storage" (page 153)
For a list of server components and part numbers, see Appendix A.
You can find more information on supported accessories and components on the web at:
http://www.hp.com/go/bizsupport

Graphics Cards

HP Integrity rx2600 server and HP workstation zx6000 servers with iLO MP cards support a
VGA monitor connected to the VGA port on the iLO MP card.
zx6000 workstations that do not have an iLO MP card are available with a range of AGP graphics
cards:
■
Graphics cards may include an 15-pin connector, an 18-pin connector, or both. Only one
connecting cable is needed for each monitor.
■
Some video cards are pre-installed in the server, while others are packaged separately and
shipped with the server. If your server did not ship with a pre-installed graphics card, you
must install the card and load the drivers. See the documentation included with your graphics
card for instructions.
NOTE: If you are running HP-UX or Linux with a graphics card but choose not to run X Server,
there are several ways to prevent X Server from starting automatically.

Supported Graphics Cards for Servers With no iLO MP Card

Depending on the OS on your server, you may have one of the following graphics cards.
You can find a complete and current list of supported cards on the web at:
http://www.hp.com/go/bizsupport
Type of Card HP-UX
High End 3D
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
Linux
ATI FIRE GL 4 nVIDIA Quadro4 900XGL
nVIDIA Quadro4 980XGL
ATI FIRE GL X1/Z1
Server Accessories
Windows
nVIDIA Quadro4 900XGL
nVIDIA Quadro4 980XGL
ATI FIRE GL X1/Z1
B
B–149