Command Authorization; Databits - HP FlexFabric 12900 series Command Reference Manual

command authorization

•
command authorization
Use command authorization to enable command authorization.
Use undo command authorization to restore the default.
Syntax
command authorization
undo command authorization
Default
Command authorization is disabled. Logged-in users can execute commands without authorization.
Views
User line view, user line class view
Predefined user roles
network-admin
Usage guidelines
When command authorization is enabled, a command is available only if the user has the
commensurate user role and is authorized to use the command by the AAA scheme.
If the command authorization command is configured in user line class view:
• Command authorization is enabled on all user lines in the class.
You cannot configure the undo command authorization command in the view of a user line in the
•
class.
Examples
# Enable command accounting for VTY 0 so its user can execute only authorized commands that are
permitted by the user role.
<Sysname> system-view
[Sysname] line vty 0
[Sysname-line-vty0] command authorization
Related commands
authorization command (Security Command Reference)

databits

Use databits to specify the number of data bits for each character.
Use undo databits to restore the default.
Syntax
databits { 5 | 6 | 7 | 8 }
undo databits
Default
Eight data bits are used for each character.
18