Table of Contents
Advertisement
MVRP commands
display mvrp running-status
Use display mvrp running-status to display MVRP running status.
Syntax
display mvrp running-status [ interface interface-list ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-list: Specifies a range of Ethernet interfaces in the form of interface-type
interface-number [ to interface-type interface-number ]. The interface-type interface-number
argument represents the interface type and interface number. If you do not specify this option, the
command displays global MVRP information and MVRP running status for all MVRP-enabled ports.
Examples
# Display global MVRP information and MVRP running status for all MVRP-enabled ports.
<Sysname> display mvrp running-status
-------[MVRP Global Info]-------
Global Status
Compliance-GVRP
----[GigabitEthernet1/0/1]----
Config Status
Running Status
Join Timer
Leave Timer
Periodic Timer
LeaveAll Timer
Registration Type
Registered VLANs :
1(default), 2-10
Declared VLANs :
1(default), 2-10
Propagated VLANs :
1(default), 2-10
----[GigabitEthernet1/0/2]----
Config Status
Running Status
Join Timer
Leave Timer
: Enabled
: False
: Enabled
: Enabled
: 20 (centiseconds)
: 60 (centiseconds)
: 100 (centiseconds)
: 1000 (centiseconds)
: Normal
: Enabled
: Disabled
: 20 (centiseconds)
: 60 (centiseconds)
230
Advertisement
Table of Contents
