Monitor; Passenger Address; Weather; 3D Audio - Garmin GTN 725 Pilot's Manual

2.2.2

Monitor

The Monitor function indicates which radios are being listened to.
1. Monitor is automatically selected for the associated Com Mic
Radio (1, 2, or 3). For example, when Com 1 is selected, Mon
1 is automatically active.
2. Touch the Mon key to toggle between the automatically
selected monitored channel (selected Mic) and the other
channels.
2.2.3

Passenger Address

The Passenger Address key toggles the passenger address system on and
off.
Touch the Passenger Address key to toggle the passenger
address system on and off.
2.2.4

3D Audio

Advanced processing adjusts audio in the headset to mimic how the human
ear normally hears and registers sounds in space. This 3-D Audio feature makes
it seem as though different audio sources are coming from different directions
around you. Now it' s much easier to focus on and understand one particular
source from among many. For example, COM 1 will seem to be coming from
the left while COM 2 may seem to be coming from the right. When 3D Audio is
disabled, balance is restored.
NOTE: The stereo/mono headsets must be in the stereo position in order
for 3D audio to function.
Touch the 3D Audio key to toggle the 3D Audio function on
and off.
This is currently done such that audio sources will either be 30 degrees
to your left (330 degrees), 30 degrees to your right, and directly in front (0
degrees). The following table details the left/right balance of the audio level
depending on the selected Com:
190-01007-03 Rev. D Garmin GTN 725/750 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain

Weather

Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
2-11
Index