Garmin GTN 725 Pilot's Manual page 109

Hide thumbs Also See for GTN 725:

Table of Contents

NOTE: Certain leg types (such as approach) or leg geometries (changes in

desire track greater than 120 degrees), combined with large offset values

do not support parallel track. Default direction and offset values may result

in the status indicating that parallel track is not supported. The user must

enter the desired parallel track offset and distance to determine whether

that flight plan, combined with the offset and distance, support parallel

1. While viewing the Flight Plan page, touch the Menu key, and

then the Parallel Track key.

Cancel Settings

2. Touch the Direction key to toggle the Parallel Track to be Left

or Right of the current Flight Plan.

3. Touch the Offset key to select the Parallel Offset from the

current Flight Plan. Select the desired distance on the numeric

keypad. Touch Enter when finished.

4. Touch the Activate key. A magenta "-P" indication will appear

to the right of the waypoint name on the Active Flight Plan

190-01007-03 Rev. D

Figure 4-29 Parallel Track Selection

Garmin GTN 725/750 Pilot's Guide

Activate PTK

Show Quick Links

Table of Contents