Garmin GTN 725 Pilot's Manual page 511

Message
REMOTE KEY
STUCK -
Alert Acknowledge
key is stuck.
REMOTE KEY
STUCK -
RP Mode key is
stuck.
SELECT
FREQUENCY -
Select appropriate
NAV frequency for
approach.
SET COURSE -
Set course on CDI/
HSI to [current
DTK].
190-01007-03 Rev. D
Description
The remote TAWS
alert acknowledge
(ALRT ACK) key/switch
has been in pressed
position for at least 30
seconds. This input will
now be ignored. This
input is not available in
all installations.
The remote RP MODE
key/switch has been
in pressed position for
at least 30 seconds.
This input will now
be ignored. This input
is not available in all
installations.
Correct NAV frequency
is not set in the active
NAV frequency for the
approach procedure.
The selected course
on the CDI/HSI does
not match the current
desired track.
Garmin GTN 725/750 Pilot's Guide
Action
Verify the ALRT ACK key/switch
is not suck. Contact dealer for
service if this message persists.
Verify the RP MODE key/switch
is not suck. Contact dealer for
service if this message persists.
Insert the correct frequency into
the active navigation frequency
window.
Set the CDI/HIS selected course to
the current desired track.
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
17-19
Index