Clean Screen Mode - Garmin GTN 725 Pilot's Manual

15.7

Clean Screen Mode

The Clean Screen mode makes the touchscreen inactive so the display can
be manually cleaned. The front bezel, keypad, and display can be cleaned with
a microfiber cloth or with a soft cotton cloth dampened with clean water. DO
NOT use any chemical cleaning agents. Care should be taken to avoid scratching
the surface of the display.
1. While viewing the Utilities page group, touch the Clean
Screen key to start Screen Cleaning Mode.
Touch To Clean Screen
2. Touch the HOME key to exit Screen Cleaning Mode.
190-01007-03 Rev. D
Figure 15-40 Utilities Page
Figure 15-41 Screen Cleaning Mode
Garmin GTN 725/750 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
15-31
Index