Map Data Fields - Garmin GTN 725 Pilot's Manual

9.1.3
Foreword
The Map Data Fields selection allows you to configure the data field type
Getting
shown in each of the four corners of the Map page. The data shown in each field
Started
may be selected from a list after Change Data Fields is selected.
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
NOTE: Map Data Field Types that use the term "Destination" refer to the
Nearest
final destination in the flight plan.
Services/
Music
NOTE: ETE to Destination is not available when a procedure is loaded and
there are waypoints in the Enroute section of the flightplan.
Utilities
System
Messages
Symbols
Appendix
9-24
Index

Map Data Fields

1. While viewing the Map page, touch the Menu key.
2. From the Map Menu screen, touch the Change Data Fields
key.
Figure 9-27 Map Data Fields Selection
Garmin GTN 725/750 Pilot's Guide
Touch To Select Data Field
(TRK Currently Shown)
Touch To Select Data Field
(DIS Currently Shown)
Touch To Cancel Any Changes
190-01007-03 Rev. D