15.1.7
Display VCALC Messages
Selecting Display Messages will allow the display of messages about the
VCALC function when they occur. With Display Messages not selected,
VCALC messages will not be displayed.
1. While viewing the VCALC page, touch Display Messages
to toggle the display of VCALC messages in the Message
function.
Touch To Toggle
Messages
Figure 15-10 VCALC Approaching Target Altitude Message
2. Touch the MSG key to toggle the display of available messages.
15.1.8
Restore VCALC Defaults
While viewing the VCALC page menu, touching the Restore Defaults
key will reset all of the VCALC values back to their default values. The Target
Waypoint will not be changed.
190-01007-03 Rev. D
Garmin GTN 725/750 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
VCALC
FPL
Message
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
15-9
Index