Units Settings Values; Utilities; Alerts Settings Values - Garmin GTN 725 Pilot's Manual

7. Select the CDI and ILS CDI Capture method with the Selected
CDI and ILS CDI Capture keys.
1.5.2.2

Units Settings Values

1. From the Home page, touch System and then Units.
2. Touch the desired item key and select the desired value.
3. Continue to select the desired Units values and then touch the
Back or HOME key to exit.
1.5.2.3

Alerts Settings Values

1. From the Home page, touch System and then Alerts.
2. Touch the Alert type key to toggle its active status. A lighted
green bar under the label indicates that it is active.
3. Set arrival alerting. Touch the Arrival key. Touch the Proximity
key and select the desired value with the keypad.
4. Touch the Airspace Altitude Buffer key and select the
desired value for airspace alerting.
5. Continue to select the desired Alerts values and then touch
the Back or HOME key to exit.
190-01007-03 Rev. D Garmin GTN 725/750 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music

Utilities

System
Messages
Symbols
Appendix
1-13
Index