1.3.1
Foreword
The GTN 7XX uses a Secure Digital (SD) card to load and store various
Getting
types of data. For basic flight operations, the SD card is required for Terrain,
Started
FliteChart, and ChartView database storage. An SD card is used for Obstacle,
Audio &
Basemap, SafeTaxi, Aviation, and ChartView database updates.
Xpdr Ctrl
NOTE: Ensure the GTN 7XX is powered off before inserting or removing
Com/Nav
an SD card.
FPL
NOTE: Refer to SD Card Use and Databases in the Appendix for instructions
on updating databases.
Direct-To
Inserting an SD Card
Proc
Charts
Wpt Info
Map
1.3.2
The GTN 7XX controls have been designed to simplify operation of the
Traffic
system and minimize workload and the time required to access sophisticated
functionality. Controls are located on the bezel and on the touchscreen display.
Terrain
Controls are comprised of dual concentric knobs, volume/squelch knob, bezel
keys, and active touch areas on the display.
Weather
1.3.2.1
Nearest
The Volume knob located in the top left corner of the bezel controls audio
volume for the selected Com radio or Nav receiver and external audio input
Services/
Music
devices that are controlled via the GTN interface to the optional remote-mounted
audio panel, if installed. When the Com radio is active, press the Volume knob
Utilities
momentarily to disable automatic squelch control for the Com radio. When the
Nav radio is active, press the Volume knob momentarily to enable/disable the
System
ident tone for the Nav radio.
Messages
Symbols
Appendix
1-4
Index
Secure Data Card
1. Insert the SD card in the SD card slot (the label side of the card
should face the right edge of the display bezel).
2. To eject the card, gently press on the SD card to release the
spring latch.
Pilot Controls
Volume/Squelch Knob
Figure 1-5 Volume/Squelch Knob
Garmin GTN 725/750 Pilot's Guide
190-01007-03 Rev. D