Point-To-Point Mode - Garmin GTN 725 Pilot's Manual

15.5.1
Foreword
The Fuel Planning Point-to-Point mode shows fuel calculations between two
selected points: either two waypoints from the database or from your present
Getting
Started
position to a selected waypoint.
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Touch To Use
Wpt Info
Present Position
As Departure
Map
Traffic
Touch To Select
Fuel on Board
Terrain
Touch To Select
Fuel Flow
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
15-22
Index

Point-To-Point Mode

1. While viewing the Utilities page, touch the Fuel Planning
key.
2. Touch the Mode key to toggle to Point-to-Point.
3. Touch the P.POS key to toggle between using your present
position as the From waypoint when selected or a waypoint
selected from the database when P.POS is deselected. If P.POS
is selected, the Lat/Lon of the present position will be shown
in the From position.
Lat/Lon Of Present
Point
Figure 15-25 Utility Trip Planning Page (Point-To-Point Mode)
Garmin GTN 725/750 Pilot's Guide
Touch To Select
Position Arrival Waypoint
Touch To Select
P-to-P or Flight
Plan Mode
Touch To Select
Expected Average
Ground Speed
Fuel Statistics
190-01007-03 Rev. D