Select Altitude Filter; Tcad 9900Bx Traffic Menu - Garmin GTN 725 Pilot's Manual

Hide thumbs Also See for GTN 725:

Table of Contents

Select Altitude Filter

While viewing the Traffic page, touch the Altitude Filter key to

change the altitude volume. Select the desired altitude volume

by touching the Normal, Above, Below, or Unrestricted

keys. The selection is displayed in the Altitude Filter field.

Selected Altitude Filter

Altitude Mode

Unrestricted

The TCAD 9900BX Menu allows control over the settings for the TCAD

Traffic display.

1. While viewing the Traffic page, touch the Menu key.

Select Shield Setup

Set Traffic Audio

2. Touch the desired key from the menu to make any settings.

190-01007-03 Rev. D

Figure 10-31 Traffic Altitude Filter Selection

Table 10-17 Displayed Traffic Range

Figure 10-32 TCAD 9900BX Traffic Menu

Garmin GTN 725/750 Pilot's Guide

Displayed Traffic Range

-9900 ft to 2700 ft

-2700 ft to 2700 ft

-2700 ft to 9900 ft

All Traffic Shown

Select Approach

Armed, or Active

Toggle Ground

Mode On or Off

Show Quick Links

Table of Contents