Garmin GTN 725 Pilot's Manual page 534

19.2.1
Foreword
The navigation database is updated on a 28-day cycle. Navigation database
Getting
Started
updates are provided by Garmin and may be downloaded from the Garmin web
site "fly.garmin.com" onto a Garmin provided Supplemental Data card. Contact
Audio &
Xpdr Ctrl
Garmin at fly.garmin.com for navigation database updates and update kits. The
Navigation database is stored internally and the data card is only used to transfer
Com/Nav
the database into the unit.
FPL
The optional ChartView database is updated on a 14 day cycle. The ChartView
database is provided directly from Jeppesen. Contact Jeppesen (www.jeppesen.
Direct-To
com) for ChartView subscription and update information. An enablement card
that is purchased from Garmin is separate from the Jeppesen database and is
Proc
required to enable ChartView.
Charts
NOTE: Garmin requests that the flight crew report any observed
discrepancies related to database information. These discrepancies could
Wpt Info
come in the form of an incorrect procedure, incorrectly identified terrain,
obstacles and fixes, or any other displayed item used for navigation or
Map
communication in the air or on the ground. Go to "FlyGarmin.com" and at
the bottom of the page select "Aviation Data Error Report."
Traffic
Updating the Jeppesen navigation database
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
19-10
Jeppesen Databases
1. With the GTN 7XX System OFF, insert the SD card containing the
navigation database update into the card slot of the GTN 7XX
to be updated (label of SD card should face to the right).
2. Turn the GTN 7XX System ON.
3. Verify the correct update cycle is loaded during power-up.
Garmin GTN 725/750 Pilot's Guide 190-01007-03 Rev. D