Garmin GTN 725 Pilot's Manual page 482

Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
16.4.1.5
The CDI source and ILS CDI Capture type may be selected manually or
Proc
automatically. The selected CDI Scale will be reflected in the annunciation bar at
Charts
the bottom of the display.
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
16-22
Index
3. Touch the Transfer User Waypoints key to transfer the User
Waypoints from the GTN unit to the connected GNS unit.
Figure 16-24 GTN-GNS Crossfill
CDI Scale Selection
Figure 16-25 CDI Selection
1. While viewing the System Setup page, touch the CDI Scale key
to allow automatic selection or to choose a CDI Scale manually.
Figure 16-26 CDI Scale Selection
2. Touch the ILS CDI Capture key to select automatic or manual.
This feature enables the unit to automatically switch from GPS
to VLOC on an ILS approach. See Procedures-ILS Approaches for
more detail on ILS approaches.
Garmin GTN 725/750 Pilot's Guide
Transfer Of User
Waypoints In Progress
Touch To Select CDI Scale
Touch To Select ILS CDI
Capture Type
Touch To Select 1 NM CDI
Scaling
Touch To Select Automatic
CDI Scaling
190-01007-03 Rev. D