Target Offset; Before/After Target Waypoint - Garmin GTN 725 Pilot's Manual

Hide thumbs Also See for GTN 725:

Table of Contents

Target Offset

The Target Offset is a pilot-selected distance value that represents the

geographical location where you wish to arrive at the target altitude. This

distance is measured from the Target Waypoint and, in a separate data field on

the VCALC page, designated as either before or after the Target Waypoint.

1. While viewing the VCALC page, touch the Offset key.

2. Use the numeric keypad to select the desired Target Offset and

then touch the Enter key.

This setting designates whether the offset distance defines a point before you

reach the target reference waypoint or after you reach the waypoint. The "After"

selection is not available for the last waypoint in a flight plan.

1. While viewing the VCALC page, touch the Before/After

2. Touching the Before/After key will toggle between Before

and After the Target Waypoint.

190-01007-03 Rev. D

Figure 15-8 Select VCALC Target Offset

Garmin GTN 725/750 Pilot's Guide

Show Quick Links

Table of Contents