10.5.1.3
Motion Vector
When Absolute Motion Vectors are selected, the vectors extending from the
traffic targets depict the target reported track and speed over the ground. When
Relative Motion Vectors are selected, the vectors extending from the traffic targets
display how the traffic target is moving relative to your aircraft. These vectors are
calculated using the traffic targets track and ground speed and your aircraft' s track
and ground speed. These two values are combined to depict where the traffic target
is moving purely with respect to your aircraft and give a forecast of where the traffic
target will be, relative to your aircraft, in the near future.
Selected Vector Type
Figure 10-12 Traffic Motion Vector Type Selection
NOTE: Absolute motion vectors are colored either white or cyan. Relative
motion vectors are always green. The annunciation on the bottom of the
dedicated traffic page indicates which vector type is selected and their length.
190-01007-03 Rev. D
Garmin GTN 725/750 Pilot's Guide
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
10-21
Index