Garmin GTN 725 Pilot's Manual page 479

1. While viewing the System Setup page, touch Runway Surface
to display the options. Touch the desired surface type.
Figure 16-20 Nearest Airport Runway Surface Type
2. Touch Minimum Runway Length to display the keypad
for selecting the minimum runway length. Select the desired
minimum runway length with the numeric keypad. A selection
of "0" will allow any length.
3. After selecting the runway length, touch the Enter key to
save the entered values or touch the Back key to return to
the System Setup page without saving a value.
190-01007-03 Rev. D
Figure 16-21 Nearest Airport Runway Length
Garmin GTN 725/750 Pilot's Guide
Touch to Select Any
Runway Surface
Touch to Select Hard
Runway Surfaces Only
Touch to Select Hard or
Soft Runway Surfaces
Touch to Select Water
Surfaces Only
Touch Key to
Delete Values
Touch Keys to
Set Values
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
16-19
Index