Raim Prediction - Garmin GTN 725 Pilot's Manual

15.3

RAIM Prediction

RAIM Prediction predicts if GPS coverage is available for your current location
or at a specified waypoint at any time and date. RAIM performs checks to
ensure that the GTN unit has adequate satellite geometry during your flight.
RAIM availability is near 100% in Oceanic, En Route and Terminal phases
of flight. Because the FAA' s TSO requirements for non-precision approaches
specify significantly better satellite coverage than other flight phases,
RAIM may not be available when flying some approaches. The GTN unit
automatically monitors RAIM during approach operations and warns you if
RAIM is not available. In such cases, use a non-GPS based approach. RAIM
prediction helps you plan for a pending flight to confirm GPS operation during
an approach.
RAIM prediction only predicts the availability of Fault Detection (FD)
integrity in the absence of SBAS corrections. It cannot predict the availability
of LPV or L/VNAV approaches. The FAA provides a NOTAM service for LPV
approach availability.
1. While viewing the Utilities page, touch the RAIM Prediction
key.
Touch To Select
Destination
Waypoint
2. Touch the Waypoint key and select the waypoint for RAIM
Prediction.
3. Touch the Arrival Date key and select the date of arrival at
the selected waypoint.
190-01007-03 Rev. D
Figure 15-12 Utility RAIM Prediction Page
Garmin GTN 725/750 Pilot's Guide
Touch To Select
Local Arrival Time
Touch To Select
Local Arrival Date
15-11
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index