Garmin GTN 725 Pilot's Manual page 504

Message
Foreword
GNS CROSSFILL -
Getting
GTN user
Started
waypoint(s)
Audio &
replaced with GNS
Xpdr Ctrl
user waypoints.
Com/Nav
GNS CROSSFILL -
Catalog full; not all
FPL
GNS waypoint(s)
transferred.
Direct-To
GNS CROSSFILL -
Proc
Waypoint transfer
failed.
Charts
GPS
Wpt Info
NAVIGATION
LOST -
Map
Insufficient
satellites. Use other
Traffic
navigation source.
GPS
Terrain
NAVIGATION
LOST -
Weather
Erroneous
Nearest
position. Use other
navigation source.
Services/
Music
GPS RECEIVER -
GPS receiver has
Utilities
failed. Check GPS
coax for electrical
System
short.
Messages
Symbols
Appendix
17-12
Index
Description
A user waypoint from
the GNS replaced
one or more existing
waypoints on the GTN.
A user waypoint from
the GNS could not be
created because the
user waypoint catalog
is full.
Waypoint transfer
failed/incomplete.
GPS position has been
lost due to lack of
satellites.
GPS position has been
lost due to erroneous
position.
Internal communication
to the SBAS board is
inoperative.
Garmin GTN 725/750 Pilot's Guide
Action
Ensure that the waypoints on the
GNS have unique names before
transferring to the GTN to avoid
overwriting existing waypoints.
Remove some of the waypoints
from the catalog to make room for
the waypoints from the GNS.
The data transfer should be
reattempted.
Wait for GPS satellite geometry
to improve. Ensure the aircraft
has a clear view of the sky. Use a
different GPS receiver or a non-
GPS based source of navigation.
Contact dealer for service.
Use a different GPS receiver
or a non-GPS based source of
navigation. Contact dealer for
service.
Use a different GPS receiver
or a non-GPS based source of
navigation. Contact dealer for
service.
190-01007-03 Rev. D