Set 1200; Services; Traffic Menu Option; Time - Garmin GMX 200 Pilot's Manual & Reference

Set 1200

Pressing the Set 1200 key sets the ADS-B code to
1200. This code entered into the GMX 200 does NOT
control the code on Mode A, C, or S transponders.

Services

The Services option allows emergency/service
codes to be sent over the data-link radio. When
pressed, a list of standard emergency/service codes
will be presented. The desired emergency/service code
can be selected and broadcast by pressing the Trans
(Transmit) "smart" key or cancelled by pressing the
Cancel "smart key." When an emergency/service code
is being transmitted, the Services menu option key
label is illuminated. To terminate the broadcast, press
the Services key again. Three of the emergency/ser-
vice codes temporarily change the ADS-B code value.
Once the emergency/service code is terminated, the
ADS-B code will revert back to the previously set
ADS-B code. The GMX 200 must be configured as the
UAT' s control panel to make this function available.
Press the Next Page key to display the next page
of menu items.
traffic Menu option Page 2
The second menu option page of the Traffic func-
tion lets you select options for the choices of Time,
Altitude Filter, Altitude type, Flight Plan, and Traffic
Map Orientation.
ADS-B Traffic Menu Items (Page 2)

time

The time interval option sets the amount of time to
estimate the path and location of the traffic. The path
of the traffic is shown by the line extending from the
point on the end of the traffic arrow icon. The end of
the line shows the point where the traffic item will be
at the end of the selected time interval. Select 1, 1.5,
2-5, or 10 minutes with each press of the Time key.

traffic Altitude Filter

For ADS-B equipped installs, an altitude filter
allows targets that are outside of a ±2000 foot vertical
range to be filtered off the display.
This option is controlled via the Traffic Function
Menu and causes the on-screen mode to change from
"ALL" to "±2000" in the upper left of the Traffic Func-
tion screen.
In the "ALL" mode, all targets, regardless of their
190-00607-02 Rev C
Detailed Operation
ADS-B Traffic