Select Altitude Filter; Tcad 9900Bx Traffic Menu - Garmin GTN 650 Series Pilot's Manual Upgrade Supplement

4.5.2

Select Altitude Filter

Selected Altitude Filter
Altitude Mode
Unrestricted
4.5.3

TCAD 9900BX Traffic Menu

The TCAD 9900BX Menu allows control over the settings for the TCAD
Traffic display.
1. While viewing the Traffic page, touch the Menu key.
Set Traffic Audio
Volume
2. Touch the desired key from the menu to make any settings.
GTN 650/750 Series SW V3.00 Upgrade Supplement 190- 01007-05 Rev A
While viewing the Traffic page, touch the Altitude Filter key to
change the altitude volume. Select the desired altitude volume
by touching the Normal, Above, Below, or Unrestricted
keys. The selection is displayed in the Altitude Filter field.
Figure 4-22 Traffic Altitude Filter Selection
Below
Normal
Above
Table 4-6 Displayed Traffic Range
Select Shield Setup
Figure 4-23 TCAD 9900BX Traffic Menu
Displayed Traffic Range
-9900 ft to 2700 ft
-2700 ft to 2700 ft
-2700 ft to 9900 ft
All Traffic Shown
Select Approach
Mode: Set,
Armed, or Active
Toggle Ground
Mode On or Off
27