Motion Vector - Garmin GTN 625 Pilot's Manual

9.5.1.4

Motion Vector

When Absolute Motion Vectors are selected, the vectors extending from the
traffic targets depict the target reported track and speed over the ground. When
Relative Motion Vectors are selected, the vectors extending from the traffic targets
display how the traffic target is moving relative to your aircraft. These vectors are
calculated using the traffic targets track and ground speed and your aircraft' s track
and ground speed. These two values are combined to depict where the traffic target
is moving purely with respect to your aircraft and give a forecast of where the traffic
target will be, relative to your aircraft, in the near future.
Selected Vector Type
NOTE: Absolute motion vectors are colored either white or cyan. Relative
motion vectors are always green. The annunciation on the bottom of the
dedicated traffic page indicates which vector type is selected and their
length.
ADS-B and TCAS Status
Touch To View
Traffic Menu
Traffic Motion
Vector (White)
Selected Vector
Motion and
Duration
190-01004-03 Rev. F
Figure 9-12 Traffic Motion Vector Type Selection
and Altitude Filter
Figure 9-13 Absolute Motion (White Vectors)
Garmin GTN 625/635/650 Pilot's Guide
Map
Orientation
Selected
Traffic Info
Touch For
Next Target
Foreword
Getting
Started
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index
9-21