Wiring Examples; Independent Operation For Speed Control Using A Digital Operator - YASKAWA VS-626M5 Instruction Manual

15.6 Wiring Examples

15.6 Wiring Examples
Several examples of wiring diagrams are given below.

15.6.1 Independent Operation for Speed Control Using a Digital Operator

The following example shows independent operation using a Digital Operator. Fixed-position stop control
using RUN, stop, and a motor encoder is possible, so this operation is useful for test operations. As shown
in Fig. 15.29, operation is possible by wiring the motor encoder and connecting the main circuit only. For
Digital Operator operations, refer to Chapter 5 Operating the Digital Operator.
15
15 -25