YASKAWA VS-626M5 Instruction Manual page 207

*1
Model CIMR-M5j
Continuous Rated Input Cur-
rent (A)
Continuous Rated Output Cur-
rent (A)
Control Method
Speed Control Range
Speed Regulation
Overload Capacity
Approx. Mass lb (kg)
Width
Dimensions in
inches inches
Height
*2 2
(mm) (mm)
Depth
1
Model CIMR-MR5j*
Required Power Capacity
(kVA)
Continuous Rated Input Cur-
rent (A)
Continuous Rated Output Cur-
rent (A)
Power Supply
Control Power Supply
Control Method
Overload Capacity
Approx. Mass lb (kg)
Width
Dimensions in
inches inches
Height
*2 2
(mm) (mm)
Depth
Power Supply AC Reactor
Code No.
*1
Model CIMR-M5j
*1
CIMR-MR5j
Ambient Temperature
Heatsink Intake Air Tempera-
ture
*4
Storage Temperature
Humidity
Location
Vibration
Protective Structure
* 1. A: For stand-alone drive system N: for NC system
* 2. Dimensions of External Heatsink Cooling Type. Refer to 14.1.3 Dimensions for Open Chassis Type.
* 3. An AC reactor is required between Converter and main circuit power supply.
* 4. Temperature during shipping.
23P7 23P5 27P5
17.6 17.6 26.2
21 21 31
Sine wave PWM Inverter (Vector control)
11 (5)
3.94 (100)
23P7 25P5 27P5
7 9 12
13.3 13.3 19.7
17.6 17.6 26.2
Three-phase, 200 VAC (50/60Hz); 220 VAC (50/60Hz); 230 VAC (60Hz)
(Allowable voltage fluctuation: +10% to −15%, allowable frequency fluctuation: ±5%,
Line-to-line voltage unbalance: 5% or less)
Single-phase, 200 VAC (50/60Hz); 220 VAC (50/60Hz); 230 VAC (60Hz)
(Allowable voltage fluctuation: +10% to −15%, allowable frequency fluctuation: ±5%)
Required power capacity: 100 VA (for independent drive system)
Power regenerative control (120_ current conduction)
120% for one minute, 200% for one second
11 (5)
3.94 (100)
X010057 X010058 X010059
23P7 25P5 27P5
0°C to 55°C (32°F to 131°F) (not frozen)
Indoor (protected from corrosive gases and dust), elevation: 1000 m (3280 ft) or less
2
9.8 m/s (1G) at 10 to less than 20 Hz, up to 2 m / s
(Protected so that parts of the human body cannot reach electrically charged parts from the front)
14 -3
2011 2015 2018
35.7 52.4 71.4
40 56 80
−1
40 min to maximum motor speed
0.2% maximum speed or less
120%, 60s of 30-minute rating
27 (12)
5.91 (150)
13.78 (350)
12.60 (320)
2011 2015 2018
19 24 30
26.8 39.3 53.6
35.7 52.4 71.4
250 VA (for NC system)
27 (12)
5.91 (150)
13.78 (350)
12.60 (320)
X010060 X010061 X010062
2011 2015 2018
0°C to 45°C (32°F to 113°F)
−20°C to 60°C (−4°F to 140°F)
90% or less (non-condensing)
2
(0.2G) at 20 to 50 Hz
IEC IP00
14.1 Drives
2022 2030 2037
88.1 104.8 142.8
98 113 160
35 (16) 57 (26)
7.84 11.81
(200) (300)
2022 2030 2037
36 48 60
66.1 78.6 107.2
88.1 104.8 142.8
35 (16) 57 (26)
7.84 11.81
(200) (300)
X010063 X010064 X010120
2022 2030 2037
14