YASKAWA VS-626M5 Instruction Manual page 180

Con- Name
stant
No.
Orientation Control
Signal Selections 3
*2
SEL-M3
C3-24 C3 24
*1. Change (change during operation) column: Indicates whether the constant can be changed during inverter operation.
Yes: Constant can be changed during inverter operation; No: Constant cannot be changed during inverter operation
*2. In signal selection descriptions, 0 stands for "
Table 10.3 Magnetic Sensor Orientation Constants (continued)
Explanation
Orientation control parameters
S Bits 5 and 4: Speed reference differential compensation gain
00: 10
01: 15
10: 20
11: 30 11: 30
S Bits 7 and 6: Flux level for positioning servo loop control
00: 100%
01: 80%
10: 60%
11: 40%
" and 1 for "
10 -13
10.3 Magnetic Sensor Orientation Constants
."
Change Unit Standard Upper
* 1
Setting Limit/
Lower
Limit
No No --- 10000000 10000000 ---
10