YASKAWA VS-626M5 Instruction Manual page 259

Digital Operator Appearance
J
The appearance of the Digital Operator is shown in the following diagram.
JVOP-132
Fig 14.20 Digital Operator Display Panel and Operation Keys
Mounting the Digital Operator to the Panel
J
The following three methods can be used to mount the Digital Operator to a control panel. Mount the Digi-
tal Operator in accordance with the application.
Table 14.24 Mounting Method Features
Item
Ease of mounting
(Extent of panel (Extent of panel
manipulation)
Ease of removal
(Removal from the (Removal from the
panel)
Applicable loca-
tion tion
(Dusty locations,
etc.)
Additional parts
code number
* 1. Mounting methods 2 and 3 require additional parts such as metal plates or resin.
* 2. If mounting the Digital Operator in a dusty location or similar, mount packaging or another
buffer between the panel and the Digital Operator.
DRIVE FWD REV REMOTE
DRIVE FWD REV
REMOTE
SEQ REF
SEQ REF
DIGITAL OPERATOR
JVOP-132
LOCAL DRIVE
DSPL
REMOTE
PRGM
DATA
JOG
ENTER
FWD
REV
RESET
RUN STOP
JOG
Method 1 Method 2
Excellent Good
3 screw holes 3 screw holes
Some difficulty Some difficulty
Fixed permanently Fixed permanently
Some difficulty Good
*2
---
--- DACT32183-AD
14 -55
14.3 Options and Peripheral Units
Mode indicators
Display panel
Keypad (display
selection keys, etc.)
*1 *1
Method 3
---
Some difficulty
5 screw holes
Excellent Method 3 enables
the Digital Operator the Digital Operator
Can be mounted and
to be mounted and
removed freely
removed freely.
---
Some difficulty
---
DACT32183-BD ---
14
Remarks