Fujitsu 8FX Hardware Manual page 47

8-bit microcontroller new 8fx family
Table of Contents

Advertisement

MB95630H Series
■ PLL Clock Oscillation Stabilization Wait Time
As with the oscillation stabilization wait time of the oscillator, when a request for state
transition from PLL oscillation stopped state to PLL oscillation start is generated due to an
interrupt in stop mode or a change of clock mode by software, the clock controller first waits
for the main CR clock oscillation stabilization wait time to elapse, and then automatically waits
for the PLL clock oscillation stabilization wait time to elapse.
Table 3.2-2 shows the PLL oscillation stabilization wait time.
Table 3.2-2
Main CR PLL clock
*: F
MCRPLL
■ CR Clock Oscillation Stabilization Wait Time
As with the oscillation stabilization wait time of the oscillator, when a state transition request
making CR oscillation start from the CR oscillation stop state is generated due to a change of
clock mode caused by an interrupt in standby mode or by the software operation, the clock
controller automatically waits for the CR oscillation stabilization wait time to elapse.
Table 3.2-3 shows the CR oscillation stabilization wait time.
Table 3.2-3
Main CR clock
*1: F
CRH
*2: F
CRL
■ Oscillation Stabilization Wait Time and Clock Mode/Standby Mode Transition
If state transition occurs, the clock controller automatically waits for the oscillation
stabilization wait time to elapse whenever necessary. Depending on the circumstances under
which state transition occurs, the clock controller does not wait for the oscillation stabilization
wait time to elapse even if state transition occurs.
For details on state transition, see "3.4 Clock Modes" and "3.5 Operations in Low Power
Consumption Mode (Standby Mode)".
MN702-00009-2v0-E
PLL Oscillation Stabilization Wait Time
PLL oscillation stabilization wait time
= 16 MHz
CR Oscillation Stabilization Wait Time
CR oscillation stabilization wait time
Sub-CR clock
= 4 MHz
= 150 kHz
FUJITSU SEMICONDUCTOR LIMITED
CHAPTER 3 CLOCK CONTROLLER
3.2 Oscillation Stabilization Wait Time
12
*
2
/F
MCRPLL
10
*1
2
/F
CRH
5
*2
2
/F
CRL
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mb95630h series

Table of Contents