Setting A Do Not Disturb Condition At Your Station; Overriding A Call Or A Do Not Disturb Condition At Another Telephone (Executive Override) - Comdial DXP Plus User Manual

GCA70-314
7.7 Setting A Do Not Disturb
Condition At Your Station
To enable DND,
1. Press preprogrammed DND button. The light associated with
the DND button turns on when the feature is active.
To disable the DND condition,
1. Press preprogrammed DND button. The light associated with
the DND button turns off when the feature is disabled.
To set a Do Not Disturb condition at your telephone when a
call rings at your station,
1. Hear ringing.
2. Press DND button. Ringing will stop, caller will hear the Do
Not Disturb tone, and your telephone will remain in DND until
you disable the feature (described above).
7.8 Overriding A Call Or A Do Not Disturb
Condition At Another Telephone
(Executive Override)
To override an in-progress call or a Do Not Disturb condition
at another telephone,
1. Make intercom call and hear a busy signal.
2. Dial 03 (all parties will hear several tone bursts).
3. Speak your announcement (if in voice-first mode) or hear
ring-back tone (if in tone-first mode).
NOTE: This action disables DND condition at the other telephone until
the user at that station resets DND.
Using The Other Features
Non-LCD Station User's Guide 7–5