Intercom Calling; Last Number Redial - Panasonic S-ICX Technical Manual

Section 700 - Operation

Intercom Calling

Description
The System provides two methods of intercom calling:
• Voice Calling: Extension calls are connected immediately, without a ringing tone.
• Tone Calling: A ringing tone is sent to the called extension.
Extension Class of Service (COS) programming determines whether the default for the originating
extension is voice or tone calling. Regardless of the default, you can toggle between voice or tone
calling by entering the Tone-Voice Call feature code. For example, if the extension default is tone
calling, you can make a voice call to another extension by entering the Tone-Voice Call feature access
code.
Operation
To make a call using Intercom Calling:
1. Lift the handset or press the ON/OFF key.
2. Dial the extension number.
3. If your extension is set for tone calling and you want to
make a voice call, enter 1.
Or, if your extension is set for voice call and you want to
make a tone call, enter 1.
4. Speak when your call is answered
5. Replace the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Considerations
• Both the called and calling parties must belong to an Extension COS that allows Voice Calling.
• You cannot change from voice call to tone call.

Last Number Redial

Description
Last Number Redial allows you to automatically redial the last number dallied by pressing the
REDIAL key.
S-ICX-50-700
Action
S-ICX (International) issued October 2000
Chapter 6. DSLT Features
Result
Intercom dial tone
241