Name Assignments; Extension Name Assignments - Panasonic S-ICX Technical Manual

Chapter 3. System Features

Name Assignments

Description
Names may be assigned to the following:
• Extensions
• Trunks
• Direct Dial Inwards (DDIs)
• Personal Speed Dials (PSDs)
• Systems Speed Dials (SSDs)
Trunk names and DDI names must be assigned in dealer programming mode. Extension names and
Speed Dial names may be assigned from a display telephone.
This feature does not require the use of a DSS/72 console or entering the programming mode.

Extension Name Assignments

Extension names can be up to 10 characters in length. (Assignment of extension names must be
allowed in the Extension COS.)
Operation
To set extension names using a large-display or small-display phone:
1. Lift the handset or press the ON/OFF key.
2. Press the PROG key.
3. Press the * key.
4. Enter 2 for the Extension Name Assignment mode.
5. Enter the extension number.
6. Press the HOLD key.
7. Press the FL/R key to clear the existing data.
8. Enter the extension name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
47.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 48.)
46
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
Intercom dial tone
EXT NO.=>
displays
EXT NAME
XXX
A B C D E F XXX displays (where
XXX = extension number)
displays (where
A B C D E F XXX
XXX = extension number)
S-ICX-50-700