Trunk Access; Direct Trunk Access - Panasonic S-ICX Technical Manual

Section 700 feature operation
Hide thumbs Also See for S-ICX:
Table of Contents

Advertisement

Section 700 - Operation
To cancel the Timed Reminder Call feature:
1. Lift the handset or press the ON/OFF key.
2. Enter the Timed Reminder Cancel code (default = *39).
3. Replace the handset or press the ON/OFF key.
Hardware Requirements
N/A
Considerations
An alarm tone (default = 60 seconds) will be issued at the specified time.
An extension can have only one Reminder Call set at a time.
To change the Reminder Call, simply enter a new time.
If the extension is in use when the reminder call is scheduled, the reminder call is issued 3
minutes later.

Trunk Access

Description
The System supports the following ways to seize an idle trunk to make an outside call:

Direct Trunk Access

MCO Trunk Access

Direct Trunk Access

Extensions can seize a specific trunk for outgoing calls. Extensions can also use Direct Trunk Access
to test trunks or to access data trunks.
Operation
To use Direct Trunk Access:
1. Lift the handset or press the ON/OFF key.
2. Enter the Direct Trunk Access code (default = 88).
3. Enter the desired trunk number.
4. Dial the phone number.
Hardware Requirements
N/A
S-ICX-50-700
Action
Action
S-ICX (International) issued October 2000
Chapter 6. DSLT Features
Result
Intercom dial tone
Result
Outside dial tone
257

Advertisement

Table of Contents
loading

Table of Contents