Dp To Dtmf Signal Conversion - Panasonic S-ICX Technical Manual

Section 700 - Operation
To set DND for another extension:
1. Lift the handset or press the ON/OFF key.
2. Enter the DND Set by Other Phone code (default = 740
[UK/HK] or 740# [Taiwan, Malaysia, Indonesia]).
3. Dial the extension number.
4. Replace the handset or press the ON/OFF key.
To cancel DND for another extension:
1. Lift the handset or press the ON/OFF key.
2. Enter the DND Cancel by Other Phone code (default = 750
[UK/HK] or 750# [Taiwan, Malaysia, Indonesia]).
3. Dial the extension number.
4. Replace the handset or press the ON/OFF key.
Hardware Requirements
• N/A
Considerations
• Forced DND override is available.
• DND override function is available by Busy Override code.

DP to DTMF Signal Conversion

Description
Dial Pulse (DP) to Dual Tone Multifrequency (DTMF) Signal Conversion allows you to switch from
DP to DTMF signalling when using a DP trunk. For instance, if you dial into a Voice Mail system
using a DP trunk, you can switch to DTMF signalling to communicate with the Voice Mail system.
(The System can automatically change DP to DTMF tones based on the incoming and outgoing
timers).
Operation
To switch from DP to DTMF dialling:
1. Press the * key or the # key.
S-ICX-50-700
Action
Action
Action
S-ICX (International) issued October 2000
Chapter 6. DSLT Features
Result
Intercom dial tone
Result
Intercom dial tone
Result
239