Automatic Day/Night Mode - Panasonic S-ICX Technical Manual

Chapter 3. System Features
Switch Mode
Night 2 Mode
1. Press the ON/OFF key.
2. Enter 763 (UK/HK) or 763# (Tai-
wan, Malaysia, Indonesia) for the
Night 2 Feature code.
3. Press the ON/OFF key
Hardware Requirements
• N/A
Considerations
• Day and Night modes can be assigned to FF keys on a phone. You can switch between Day 1,
Day 2, Night, Night 1, and Night 2 modes simply by pressing the appropriate key. The FF key
lights red when the System is in the assigned mode. Alternatively a Day/Night toggle mode key
can be assigned. Pressing the key toggles between modes. When in Day mode, the FF key LED
is not lit. When in Night mode, the LED lights red.
• Day 1/Day 2/Night toggle mode key can be assigned. Pressing the key toggles between modes.
When in Day 1 mode, the FF key LED is not lit. When in Day 2 mode, the LED lights green.
When in Night mode, the LED lights red.
• Day/Night toggle mode key can be assigned. Pressing the key toggles between modes. When in
Day mode, the FF key LED is not lit. When in Night mode, the LED lights red.

Automatic Day/Night Mode

You can set the System to automatically enter a particular Day/Night mode determined by the time of
day. Each day of the month can be assigned 1 of 3 automatic system mode patterns. Each of the
patterns can be set to change modes up to 5 times per day.
Up to 20 special days can be programmed with up to 5 automatic mode changes for the day.
An Exception Day period is available for overriding the automatic mode for extended periods of time.
For instance, if an office is shut down for the week of July Fourth, the System can be programmed to
not operate in the automatic mode for those days. The System will stay in the same mode for the
period. The mode may be manually changed at any time.
For instance, the System can be set to automatically enter Day 1 mode at 8:00 a.m. on weekdays and
enter Night mode at 5:00 p.m. on weekdays. All incoming calls, TRS (Call Barring) and attendant
group handling would change accordingly. On Saturday and Sunday, the System would stay in Night
mode.
The Automatic Day/Night modes may be set in User Maintenance. See "Set Mode Schedule" on page
87, "Set Special Day Mode" on page 96, "Set Exception Day Mode" on page 83, and "Set Day of
Week Mode" on page 81.
Hardware Requirements
• N/A
Considerations
• You can only set Automatic Day/Night modes on a system-wide basis. If tenant groups require
separate Day/Night modes, you must set these modes manually.
36
Procedure
S-ICX (International) issued October 2000
Indication
Intercom dial tone
ON/OFF LED lights
ON/OFF LED goes off
Red Night LED lights
Section 700 - Operation
S-ICX-50-700