Message Key - Panasonic S-ICX Technical Manual
Section 700 feature operation
Hide thumbs
Also See for S-ICX:
- Technical manual (296 pages) ,
- Quick reference manual (4 pages) ,
- Technical manual (59 pages)
Table of Contents
Advertisement
Chapter 5. Key Telephone Features
To receive a call on an MCO key.
To place a call on Exclusive trunk Hold
To place a call on System Trunk Hold
To transfer a call
Considerations
•
Press the MCO key that flashes red to answer an outside call.
•
If you are already on a call appearing on an MCO key and you press another MCO key, a line on
the other MCO key is selected and the first call is dropped.
•
If a trunk key is assigned, the trunk key LED will light when that specific trunk is used instead of
the MCO key LED.
•
There are five groups of outside lines: (usually 9 [UK/HK], 0 [Taiwan, Malaysia, Indonesia], or
81-84 by default) .
•
MCO keys cannot be assigned on the DSS/72 or the EM/24.
•
An MCO key must be assigned in programming mode. The MCO key cannot be assigned by the
end user with FF key assignments.
Message Key
Description
The System supports the MSG FF key on the VB-44225/VB-D411LDSUK large-display phone. This
key provides the following functionality:
•
Message Wait Callback: If a callback message has been left by another extension, you can
press the MSG FF key to place an automatic callback to that extension. If more than one
callback message has been received, pressing the MSG FF key performs auto-callback in the
order received.
•
Priority Message Wait Callback (One-Touch Voice Mail Access): You can press the MSG
FF key to automatically access your voice mailbox. The phone will dial your voice mailbox
and send access codes (if programmed) for retrieving new messages.
172
If ringing line preference is enabled, go off-hook.
If ringing line preference is not enabled, go off-
hook and press the MCO key with the green
flashing LED.
The LED lights solid green.
Press the MCO key.
The key flashes green while the call is held.
Press the HOLD key.
The key flashes green while the call is held.
Press HOLD, dial the destination extension, then
press PROG (if on-hook transfer is off) or go on-
hook.
S-ICX (International) issued October 2000
Section 700 - Operation
S-ICX-50-700
Advertisement
Table of Contents
