Set Call Forward Busy Destination Extension - Panasonic S-ICX Technical Manual

Section 700 - Operation
11. To set additional Absence Messages, press the volume up
or down key or press the HOLD key to move to the desired
Absence Message.
12. Repeat steps 7-11 until all Absence Messages are entered.
13. Press the MEMORY key to exit the entry mode.
14. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
Hardware Requirements
• N/A
Considerations
• N/A

Set Call Forward Busy Destination Extension

Description
You can assign a Call Forward Busy Destination Extension for each extension. This is typically used
for forwarding calls to voice mail.
Operation
To set a Call Forward Busy Destination Extension using either a large-display or
small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 09.
3. Press the HOLD key.
4. Enter 0.
5. Press the HOLD key.
6. Dial the extension number.
7. Press the HOLD key.
8. Enter the destination extension.
9. Press the HOLD key to store the entry.
S-ICX-50-700
Action
Action
S-ICX (International) issued October 2000
Chapter 4. User Maintenance
Result
Desired Absence Message displays
Enter Msg # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
Result
81-
User MAINT displays
8109-
TRF of CFWD displays
CFWD-Busy EXT # displays
Enter CODE displays
Next extension number displays
77