Onhook Dialling - Panasonic S-ICX Technical Manual

Section 700 - Operation
Hardware Requirements
• N/A
Considerations
• If Onhook Transfer is enabled, the held call is transferred as soon as the extension sending the
OHVA hangs up.
• If the transferred call is not answered immediately, it will queue for a set time limit, then return to
the extension sending the OHVA by Transfer Recall Timer.
• You cannot receive a Call Waiting message during an OHVA.
• If you make an OHVA to an SLT, the SLT user and the other party will hear the announcement.

Onhook Dialling

Description
Onhook Dialling allows users to dial without lifting the handset. However, the Digital Single Line
Telephone (DSLT) does not have a microphone so you must lift the handset to talk.
Operation
To use onhook dialling:
1. Press the ON/OFF key.
2. Enter a trunk access code (default = 9 [UK/HK], 0 [Taiwan,
Malaysia, Indonesia] or 81-84), or dial an extension
number.
3. If you entered a trunk access code in step 2, dial the phone
number. Otherwise, proceed to step 4.
4. When the call is answered, lift the handset to talk.
Hardware Requirements
• N/A
Considerations
• N/A
S-ICX-50-700
Action
S-ICX (International) issued October 2000
Chapter 6. DSLT Features
Result
Intercom dial tone
245