Network Facilities; Network Attendant Reversion; Network Call Routing; Network Call Transfer - Panasonic S-ICX Technical Manual

Chapter 3. System Features
• The ability to make extension name assignments is allowed/restricted to anyone with a Class of
Service (COS) that allows access to User Maintenance features. (See Chapter 4 "User
Maintenance" of this document.)

Network Facilities

Description
The System supports networking facilities such as:
•

Network Attendant Reversion

•

Network Call Routing

•

Network Call Transfer

•

Network Centralized Attendant

• Network Centralized Voice Mail
• Networking Extension Calling
• Network Flash Transfer
• Network Hold
• Network Paging
• Network Transfer Recall
• Tandem Calling
For more information on System Networking, see the System Networking Reference Manual.
Network Attendant Reversion
Network Attendant Reversion enables calls to revert to the attendant in the same CCU. Calls will not
revert if the CCU receiving the call has no attendant. Network Attendant Reversion does not work
with Network Hold.
Network Call Routing
Network Call Routing allows multiple systems that are interconnected in a network, to direct calls to a
specific tie line based on the number dialled. The call does not leave the network.
Network Call Transfer
Network Call Transfer allows a call at an extension to be transferred to another extension in the
network.
Network Centralized Attendant
Network Centralized Attendant allows callers from one node to dial the operator in another node by
dialing 0.
52 S-ICX (International) issued October 2000
Section 700 - Operation
S-ICX-50-700